Reference: UCF480
Brand: Under Cover Fabworks
UCF Trailer Stake Pocket D-Ring
UCF Trailer Stake Pocket D-Rings are a versatile way to strap a load.
Banner
619620082725
Easily mount a Double-Ended Steering Ram with an absolutely bulletproof system.
The UCF Dana 60 Double-Ended Steering Ram Mount is designed to be used in cases where a truss is unnecessary but the customer still needs to mount a double-ended steering ram in the center of the front or rear axle. It is designed to work with standard high-steer arms. The main body and upright are fabricated from 1/2" steel plate and the front and rear support gussets are 3/16" steel. It is fully welded and ready to be installed on your axle.
Reference: UCF480
Brand: Under Cover Fabworks
UCF Trailer Stake Pocket D-Rings are a versatile way to strap a load.
Reference: UCF576
Brand: Under Cover Fabworks
We are happy to introduce a new product to help protect the upper fill-port on ORI STX Struts. This part is fabricated from 16 gauge steel plate and is designed to attach securely to the top of the strut with a stainless steel band clamp. It fits tightly to the top of the strut to prevent any rotation which could damage the fitting.
Reference: UCF449
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF042
Brand: Under Cover Fabworks
Our Pinion Guard will save your yoke time and again
Reference: UCF649
Brand: Under Cover Fabworks
Our new heavy duty tailgate hinges completely replace the factory hinges with upgraded units. These are bushed with Delrin bushings that will provide many years of maintenance free service. No greasing required.
Reference: UCF669
Brand: Under Cover Fabworks
These aluminum hinges can be used to fabricate your own trail doors or to replace lost parts.
Reference: UCF633
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF604
Brand: Under Cover Fabworks
Use these plates to mount a removable winch hoop on your TJ or LJ.
Reference: UCF164
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF629
Brand: Under Cover Fabworks
Mount a winch to any flat surface with this heavy-duty fairlead bracket.
Reference: UCF521
Brand: Under Cover Fabworks
Protect the stock axle ends from bending in the harsh conditions you would see when rock crawling or desert racing.
Reference: UCF539
Brand: Under Cover Fabworks
Relocate your factory locker pumps to a UCF transfer case skid plate with this bracket.
Reference: UCF648
Brand: Under Cover Fabworks
Reinforce your tailgate hinges to spread the load onto your body tub more uniformly.
Reference: UCF394
Brand: Under Cover Fabworks
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
Reference: UCF646
Brand: Under Cover Fabworks
Lose your engine skid hardware kit or purchase a used skid without the hardware?
Reference: UCF651
Brand: Under Cover Fabworks
Our new Jeep JL Outer Tire Carrier Reinforcement Bracket is fabricated from 1/4" 6061-T651 aluminum plate for the ultimate in strength and performance