The UCF Long-Arm Upgrade Kit for Jeep LJ Unlimited consists of 8 suspension links from Rough Country that utilize Currie "Johnny Joints" on one end and a factory-style Clevite rubber buhing on the other plus the UCF Long-Arm Bracket Kit.  

The front arms are arranged into wristed radius arms so that the uppers attach to the lowers about mid-way down the arm.  

The rear arms are designed to correct the anti-squat problems present with RC's version of the long-arm kit.  The upper arm mounting points at the frame have been raised over 5" to get the anti-squat numbers close to 100%.  

All the long arms attach to the axles at the factory mounting points.  

The UCF Long-Arm Bracket Kit for Jeep Wrangler TJ/LJ Unlimited is built primarily from 1/4" carbon steel plate.  It is comprised of 4 brackets total.  One for each front radius arm, one that mounts the rear driver side upper and lower arm, and one more that mounts the rear passenger side upper and lower arm.

The brackets are fully gusseted and will ship ready to weld onto your Jeep.  They will be shipped bare of all finishes that would be destroyed by the welding process.  Mounting instructions that clearly define where and how the brackets should be mounted are included.

This bracket kit will correct the suspension geometry created by the "off-the-shelf" RC LA kit, improve ground clearance, and avoid skid plate modifications that are required with the RC brackets.