Banner
619620082534
Link Mounts for Flat Surfaces
UCF Flat Bottom Tab We offer the UCF Flat Bottom Tab exclusively in 5/16" carbon steel plate. It is 3 3/4" long and 1 3/4" from the lower flat surface to the center of the mounting hole. All holes are sized at 9/16" (.5625") in diameter. Sold Individually. You will need (4) tabs to mount one link OR (4) tabs to mount the axle side upper links to one of our truss systems.
Reference: UCF149
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF148
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF157
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF150
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF151
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF024
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF152
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF081
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF654
Brand: Under Cover Fabworks
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
Reference: UCF141
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper CA mount with this beast.
Reference: UCF143
Brand: Under Cover Fabworks
Rear Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF144
Brand: Under Cover Fabworks
Upper Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF423
Brand: Under Cover Fabworks
These coil spring mounts will allow you to mount TJ rear springs on any vehicle with a 2.5" wide frame rail.
Reference: UCF082
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Link Mounts for Flat Surfaces
